 |
It’s
innovative push and Web server technologies open up many
new possibilities. Now, you can receive alarms and reports
automatically on your cell phone, PDA, or computer. Automatic
alarm escalation ensures that all key personnel are fully
informed. EXAKOM M2M Connector not only stores live and
historical information, it also maintains formatted reports
and Web pages. Using push technology, it transmits them
to multiple recipients as events dictate. No polling is
necessary. This capability keeps network traffic to a minimum
while reducing the infrastructure and network overhead costs
associated with traditional SCADA networks.
|
Designation
Processor
Clock
Memory
Communication
PSTN modem
GSM/GPRS modem
Antenna
Inputs/outputs )
Push button
Programming
Alarm handling
Data logging
IT features
Protocol support
Power supply
Consumption — Vin 24 V
Battery charger Embedded.
Temperature
Humidity
Material
Approvals
MTBF
Size
Weight
|
Industrial-grade, all-in-one remote terminal
unit (RTU)
16-bit Mitsubishi 7.37 MIPS
Real-time clock with lithium battery backup
Flash 768 KB
RAM148 KB
SD/MMC card up to 1 GB
Ethernet (10/100BaseT)
PSTN or GSM/GPRS (read/write support)
RS-232 Modbus slave (for programming only) — 2 wires
(Rxd/Txd)
RS-485 — 2 wires
300 bps…56 kbps — RJ12 connector
ITU-T: V21, V23, V22, V22bis, V32, V32bis, V34, V90, Bell
103, and Bell 212A
Tri-band: EGSM900/DCS1800/PCS1900
Class 10 (4+1/3+2) GPRS with PBCCH, SMS, and data support
FME male connector
LT-200: 2 counter inputs
8 digital inputs or outputs
6 analog inputs 4/20 mA, 13 bits
2 temperature inputs (Pt1000)
4 relays outputs (230 V ac 3A
RUN-STOP-RESET
Via TWinSoft Suite (automation, Web editor, report editor)
Automation languages Ladder logic (IEC 61131-3), Basic, C
Smart alarm management with embedded calendar
Intelligent logging: sampling tables (instantaneous, min,
max, average), digital and analog chronologies, SoE
HTTP, FTP, SMTP (email), SNMP, IP forwarding, DynDNS, NTP
…
Support for over 40 drivers including Modbus (master/slave,
RTU, TCP, ASCII), DNP 3.0, IEC 60870-5 …
20-30 V dc or 12 V dc
225 mA
Constant current/limited voltage. Max 13.8 V dc
Storage: -40° to +80°C/-40° to + 176°F
Working: -20° to +65°C/-4° to +149°F
0-95% no condensing
Proprietary aluminum enclosure, anodized and Alodined for
corrosion and noise interference resistance
CE, UL/CSA
MTBF > 400,000 hours, statement available on request
Size Height x depth x width: 150 x 83 x 29 mm/5.91" x
3.27" x 1.14"
Weight 300 gr/9.65 oz |
Feb 2009 -- EXAKOM
Automation host customer’s pilot projects to prove M2M
application benefits.